How to Assemble Your Beams of Light Menorah

This page will walk you through how to assemble your Beams of Light Menorah. Watch the step-by-step video below, or follow the written instructions below!

Assembling Your Menorah is Easy!

  1. Set up the base:
    Loosen the levers and unfold the base. Tighten the levers to lock the legs securely. If the floor is uneven, adjust the screw and feet for stability.

  2. Prepare the center branch:
    Hold the center branch, insert the bulb, and fasten the cover.

  3. Attach the branches:
    Connect the center branch to the main stem, ensuring connectors are properly aligned.
    Attach the two smaller branches.

  4. Secure the main stem:
    Slide the assembled main stem onto the base and tighten the lever for a secure fit.

  5. Power connection:
    You may connect the power either now or after completing assembly.

How to Operate Your Menorah:

  1. Select bulbs:
    Use the top button to choose how many bulbs you want illuminated.

  2. Adjust brightness:
    Use the dial to set your desired brightness level.

  3. Auto mode:
    Press the bottom button to activate Auto mode. One bulb will automatically light at sunset.

  4. Indoor Auto mode:
    Hold the bottom button to enable Indoor Auto. In this mode, one bulb lights every 24 hours from activation.

  5. Eco mode:
    Press the top button to activate Eco mode. Eco mode ensures the LEDs operate only during nighttime hours.

  6. Sidewalk mode:
    Hold the bottom button to activate Sidewalk mode. In Sidewalk mode the LEDs automatically dim at night.